One of our most frequent enquiries at the History Centre is along the lines of ‘I’m trying to find out where my great aunt is buried; her death was registered in Salisbury in 1923…..’ We can usually help them track down the place of burial, but what they really want is to find the plot to visit. People assume that all churches have a plan of their burial ground, when the reality is that most don’t.
My interest in this subject began as a small child when I accompanied my father, who mowed the grass in our village churchyard. While he was busy mowing I was busy wandering around looking at all the grave stones. Who were these people, where did they live, what did they do? Horningsham also has a number of listed tombs which are bigger and grander than a headstone and often commemorate whole families. I was fascinated by all these people and wanted to find out more about them.
Many years later I found two friends who were happy to help me survey the churchyard and this was the beginning of my project. Horningsham is a challenge geographically, as the church is on a hill and the burial ground is divided into three sections, all on different levels. I soon realised that this was not going to be straight forward! However, with the help of my friends (I couldn’t possibly have done it on my own), and countless visits to check my drawing, I have at last finished. It has taken me years and five attempts at drawing a map I am happy with, but it is a huge sense of achievement to have finished at last. Along with the map I have also transcribed the inscriptions and photographed all the stones.
Is this something that might interest you? There are countless parishes still to be done and the staff here are always happy to help you. The archaeology team will be able to provide you with a large copy of the ordnance survey map, to give you an accurate ground plan to work from. The first thing I did was to draw an outline of the church, as I used the row of pillars on the south wall as fixed points from which to measure the stones. The scale I used was 1:100. The graph paper was marked in millimetres.
From here I began plotting each stone from two fixed points.
On a 1:100 scale, 145cm and 130cm reduce to 14mm and 13mm. You then draw two arcs (using a compass), and where the two arcs meet is the centre of your headstone. A cross will probably suffice to mark a headstone, but a tomb will need a square.
Fortunately, I had the church on one side of the square and a wall on a second side which gave me a straight line of graves that were easy to plot. Together, these gave me two sides of fixed points that helped me plot the remaining graves.
I had a room full of interested attendees for my first History Revealed day. For those of you who are familiar with our Interpretation courses at the History Centre, this is a variation on a theme. I would like to extend the scope of this type of event which to date has been reliant on the morning study session being within easy reach of the field visit in the afternoon, tying us to the Chippenham area. My grand plan is to use our wonderful public libraries as a base for the study session to allow us to explore further afield.
This was our first ‘test case’, although not much further afield I grant you! However, it did coincide with Calne Heritage week which was very fitting.
Calne Library proved a great venue for hosting the morning session where attendees enjoyed a presentation beginning with guidance on what to think about when tracing the origins of a village. I continued by explaining how to make the most of secondary sources, including material by local authors, academic works, the census, local directories and much more. Bremhill was used as a case study with examples and details highlighted to prove how much can be gleaned from these types of sources. They are a good place to start as the legwork has already been done for you!
I continued with a look at maps – the enclosure award was a big hit and rightly so, the field names in particular are fascinating to look at, especially when studied in conjunction with older and more recent written and map sources.
My colleague, Archivist Ally McConnell, then shared a number of archive sources for Bremhill with the group, explaining just how they can be utilised for local history research. These included plans, school records, sales particulars and more.
We concluded the morning session with a look at a number of online sources which can aid research into village history and attendees got hands-on with a number of books available at Calne Library which can help with local history research in general and at Bremhill.
I was interested to read a recent news story which described scientific work to extract DNA from parchment using a non-destructive technique, giving us remarkable and unexpected source of information about the animal the page was created from. It has also proved possible to extract DNA of people who have touched or kissed the manuscripts over the years (devotional prayer books for example).
Thinking about the physical fabric of the archives led me to consider our more common archive material; paper. We see paper as a prosaic item nowadays and take it for granted, but it used to be much more valuable and remained expensive until the advent of the steam-driven paper mill.
There is limited documented evidence about paper making before the 18th century and the knowledge and skills would primarily have been shared directly between family members and master and apprentice. We have records of apprenticeships in our parish collections including Edward Hayword from Bradford-on-Avon who was apprenticed to a Gabriel Sweet, Weston, Somerset in July 1745 and a Thomas Whale from Chippenham, apprenticed to a Charles Ward, papermaker at Doncombe, North Wraxall in November 1804.
The process of making paper was a complex one involving many stages and can be read about in more detail in various publications including The British Paper Industry 1495-1860 by D.C Coleman available in our local studies library (shelfmark 338.476). The cellulose fibres in plant tissues were macerated and mixed with water until the fibres separated and were lifted from the water using a sieve-like screen, leaving a sheet of matted fibres on the screen’s surface. This then required pressing, drying, sizing, and finishing before it could be used as paper.
We have several wills in our collection left by papermakers. These can give some indication of the kind of wealth and social standing of the profession.
In the 1792 will of John Lewis, paper maker of Yatton Keynell he bequeathed all his household goods and furniture to his wife, Mary Lewis. He also left an annuity of £8 to be paid to his sister, Elizabeth Parker, to be paid in equal quarterly instalments every year until her death. John Lewis makes it explicit that this money ‘is not liable to the debts or engagements of my said sisters husband or any other husband he may hereafter have and that her receipt alone…’ He also bequeathed to Thomas Vincent, a grocer of Calne (named as executor alongside his wife), all his real estate at Longdean and Yatton Keynell. It is pleasing given his profession that he sees fit to mention the paper that the will is written on:
“… to this my last will and testament contained in two sheets of paper set my hand and seal as follows (that is to say) my hand to the first sheet thereof and my hand and seal to the last sheet and my seal at the top where both sheets join”.
Another will belonging to Thomas Bacon, papermaker of Downton, dating to 1679 includes an inventory of his goods. These include materials and goods from the mill house including scales and weights, paper moulds and their respective values.
Redlynch is a very interesting example of a former forested area that has only been populated to any great extent over the last two centuries. The earlier buildings are in local brick, including this interesting example in Slab Lane, next to The Old Thatched Cottage, now known as The Hollies, a remodelled house of the 17th century. The subject of the study, an early-19th century brick and stone outbuilding, is approximately 5 metres to the east of The Hollies.
The outbuilding is of two bays and set at right-angles to The Hollies. It is constructed of local rubblestone and flint dressed with local brick. It is unusual in that the north-west elevation facing The Hollies is entirely fenestrated with 6 large windows, indicating a need for light on both ground and first floor. At this time Redlynch had smithies and a foundry while broom making was a traditional local trade that continued until the Second World War. It is possible that the outbuilding was used in such a way, but with many of these small ancillary buildings we just can’t tell exactly. I suspect that the uses changed over time according to the needs of the person who lived there. A wide original double doorway suggests workshop use.
Mapping of 1822 shows that an outbuilding existed on the present site which belonged then, as now, to the Mitchell family. The later tithe mapping of 1840 is unfortunately torn at that point, but does not show an outbuilding existing on the present footprint. The first real evidence of the outbuilding is shown on the 1901 edition of the Ordnance Survey.
Iron Age hillforts must be one of the most visited types of archaeological sites in the country. Recently I have been up to Barbury Castle a couple of times and have been reminded how impressive and commanding this site is, not just because of its massive ramparts, but also its good state of preservation and all of the other archaeological features you can see from here. It is one of the most impressive of the 35 hillforts we have in the Wiltshire and Swindon area, with panoramic views that take in the Marlborough Downs and the Vale of Pewsey.
Barbury is located between Wroughton and Swindon and the County boundary, as well as parish boundaries, run through the middle of the hillfort. The hillfort was built in the Iron Age, probably around 700 BC and is likely to have been continuously used until the Roman invasion in the mid 1st century AD. It was one of a string of hillforts built close to the line of the Ridgeway, considered to be an ancient long distance routeway. Three other hillforts, Liddington, Uffington and Martinsell are all intervisible with Barbury. It is the most developed and most impressive of the Ridgeway hillforts, having double ramparts on the south side and triple on the north side (possibly an unfinished circuit). In places the banks or ramparts stand over 3 metres in height even now and in the Iron Age would have been topped with wooden palisades and defensive towers. Located at 262 metres above sea level Barbury was built on the highest point of the local area, a beneficial defensive position with commanding views of the landscapes below.
The ramparts at Barbury enclose an area of about 5 hectares and there were two original entrances that survive today at the east and west sides. Unfortunately there has been little modern archaeological investigation to tell us details of the lives lived at Barbury. However, the results of a geophysical survey carried out by English Heritage in 1998 indicate that the interior is littered with hundreds of pits (probably for grain storage) and other features, some of which are the remains of huts or roundhouses.
The interior of the hillfort as well as the ramparts have suffered some damage in the 1940s from the activities of American troops and the Home Guard who were based at the nearby Wroughton Airfield during the war and used Barbury as a training ground. The original hillfort entrances were unfortunately widened by American troops in order to get their trucks into the interior. Fortunately, we have a measured survey drawn in 1884 by General Augustus Pitt Rivers, the first ever Inspector of Ancient Monuments, to show how they would have been.
Have you ever thought about investigating the history of your community but aren’t sure where to start? Why not organise a Reunion! This is something I first started in Horningsham in 1995 and 23 years later we are still going strong! It first began in 1994 when I wanted to mark the 150th anniversary of the rebuilding of our church. We held a special service with refreshments afterwards and it was a great success. Someone then had the idea of tracing as many people as we could find who had been baptised in the church, to invite them to a Reunion. Everyone who came enjoyed it so much that they asked if we could do it again the following year, when we chose marriage as our theme………
There are some key factors that will guarantee success. Food and drink is always a good ice breaker, so try and offer some nice treats to your guests. If they are travelling a long way it is good to offer lunch if you can. My experience is that once people sit down with friends over lunch, they are very happy to just sit and chat.
Old photographs are always popular and are a good way of stimulating conversation and memories. This will also encourage people to search through their own collections and find you something for next year. My best find was the year that I was given a photograph of the Royal School at Bath, who were evacuated to Longleat House during WWII. I couldn’t believe my luck and knew immediately that I had my theme for the next year (2008). Many villagers were on the picture as staff who helped look after the girls and I was put in touch with some former pupils who were still living locally and who offered to share their memories with me. This proved to be one of our most successful events.
You will be surprised by how quickly your invitation list grows. Many times I was asked ‘have you contacted my cousin/auntie/school friend….’ and for many years the number of people attending was over 60. Every year I think of a theme and put up a display of photographs in the church, for people to look at before the service. If you tell people what the theme will be in their invitation, someone is sure to offer you some photographs. Photos with people or houses are the most popular; everyone likes to see a wedding photo or the house they grew up in. The friends who come to the Horningsham reunion have been so generous over the years that in 2000 I had enough material to publish a book for the millennium.